Startfrom €413a flat, to give it a try
- gateway in the consumer unit
- three smart light switches — a module behind the old switch
- the app set up with you
- 30 minutes of training
devices 300 + installation and setup 3.3 h ≈ 113 = 413
lighting · blinds · climate · water heater · energy · holiday home, remotely
A smart home that does the job.
Not an expensive system with a programmer on call. Smart modules and a Netatmo thermostat added to your existing wiring: lighting, blinds, heating and cooling, water heater and an alert when the power goes off — all from your phone, with no rewiring and no subscription.
Starter package from €413gateway, three smart switches, installed and set up in half a day; then you add room by roomPoint from €78a module behind your old switch — the switch stays and works, and the light also comes on from your phoneNo rewiringno cables, no chasing; we check for a neutral in the box from your photo; blinds from €90, thermostat from €249No subscriptionworks without the internet too, over your home network; from your phone when you’re out; you’re the admin
Netatmo · Legrand and bticinocontract and invoice, always24 months installation warrantypassport: which device controls which circuitwe still answer the phone after installation
Floor plan of a flatfour moments of the day — tap one
06:30. The blinds go up by themselves, the water is hot on schedule, the heating is at 21°. The hallway and bathroom lights come on with motion.
- 1Lightinga module behind the old switch or a wireless switch in a new spot; ‘Evening’ and ‘Going out’ scenes, lights on with motion
- 2Blindsa module in the motor box; by the clock, by the sun, all at once with one press
- 3Heatinga thermostat for the boiler or air conditioner, smart valves on the radiators; on a schedule and remotely
- 4Water heatera module with a schedule — hot when you need it, off when you’re away
- 5Energya meter in the consumer unit and metering sockets — you see what’s using power
- 6The dooran opening sensor — an alert on your phone, in its own app
- 7Your phonealerts for power cuts, leaks and an open door; you control everything from there too
01What we automate
Room by room, appliance by appliance, switch by switch. You see every price, and the total adds up as you go.
Everything has a ‘from’ price — the device from our supplier’s catalogue, installation and setup. Click a row to see what’s included; ‘+’ adds it to your list. The exact figure comes in the quote within 24 hours, based on photos of your switches and consumer unit.
Start
0
A gateway in a back box or in the consumer unit, and three modules behind your old switches — the switches stay, and the lights also come on from your phone. We set up the app with you — rooms, names, scenes — and leave you as the admin.
Includedgateway, 3 smart light switches (module behind the existing switch), installation, app setup, 30 minutes of training
Not includednew cable runs and points; extra switches — see the ‘Smart light switch’ line
how long it takeshalf a day
what photo to sendthe switches you want to make smart, the consumer unit with the cover off, and where the router is
0
The little box that lets the switches and modules talk to your phone. In a back box next to the consumer unit or on a DIN rail inside it. One per home.
Includeddevice, installation, connection to Wi‑Fi
Not includeda router, if you don’t have one; a second gateway for a very large house
how long it takeshalf an hour
what photo to sendthe consumer unit with the cover off and where the router is
Lighting
0
A module in the back box behind the switch: the switch stays and works, and the light also comes on from your phone and on a schedule. Want to switch it from a new spot as well? A battery-powered wireless switch sticks to the wall, no cable needed.
Includedmodule behind your existing switch (the switch stays), installation, adding it to the app
Not includedthe light itself; the frame, if you’re changing the switch range
how long it takes20–40 minutes
what photo to sendthe switch, and its back box opened up if you can
0
A dimmer module behind the switch: dims the light from the switch and from your phone, and can be part of scenes. For dimmable LEDs.
Includedmodule, installation, adding it to the app
Not includedthe light itself; if your LEDs aren’t dimmable, we’ll tell you from the photo
how long it takes30–40 minutes
what photo to sendthe switch and what kind of bulbs you have
0
A two-position wireless switch by the door: ‘Going out’ turns everything off and turns the heating down, ‘Coming home’ brings back the evening scene.
Includedswitch, setting up both scenes
Not includedthe devices the scenes control
how long it takes20 minutes
what photo to sendthe spot by the door
Blinds
0
A module in the motor box or behind the blinds switch. Up, down, stop — from the switch and from your phone; by the clock, at sunrise, all at once.
Includedmodule, installation, setup
Not includedthe blinds themselves, and the motor if there isn’t one; a second window — separate line item
how long it takesabout an hour
what photo to sendthe blinds switch and the motor box
Climate
0
A Smarther 2 in place of the old thermostat: a day-by-day schedule, remote control, and you can see the temperature. For a boiler, convector heater or air conditioner with a thermostat input.
Includedthermostat, installation, connection, setup
Not includedthe boiler or air conditioner itself; a new circuit to the boiler, if there isn’t one
how long it takesabout an hour and a half
what photo to sendthe old thermostat and the boiler
0
Netatmo smart valves on the radiators, with a relay to the boiler: each radiator gets its own temperature and schedule. Nothing on the boiler is touched apart from the relay.
Included2 smart radiator valves, relay, installation, setup
Not includedmore radiators — see the ‘Smart radiator valve’ line; valve bodies, if the radiators don’t have them
how long it takesabout an hour
what photo to sendthe radiators and the boiler
0
One more Netatmo smart valve for the next radiator, in the same app.
Includedsmart radiator valve, installation, pairing
Not includedthe valve body, if the radiator doesn’t have one
how long it takes15 minutes
what photo to sendthe radiator
Water heater and appliances
0
A connected module for the water heater: runs it on a schedule and from your phone, and shows whether it’s on. The saving comes from it not heating all day.
Includedmodule, installation, schedule
Not includedthe water heater; a dedicated circuit, if there isn’t one
how long it takesabout an hour
what photo to sendthe consumer unit and where the water heater is
0
A connected socket module: the appliance switches on from your phone and on a schedule, and you can see whether it’s on.
Includedmodule, installation, pairing
Not includedthe appliance itself
how long it takes30–40 minutes
what photo to sendthe socket and the appliance
Energy and alerts
0
A meter in the consumer unit: how much the home uses by hour and by day, and when the peak is. It shows what the water heater schedule actually saves.
Includedenergy meter, installation in the consumer unit, setup
Not includedspace in the consumer unit; if there isn’t any, extending it is priced on the Electrician list
how long it takesabout an hour and a half
what photo to sendthe open consumer unit
0
A small sensor on the floor under the washing machine, water heater or sink. An alert on your phone at the first sign of water — in its own app, separate from Netatmo.
Includedsensor, setup (in its own app)
Not includedshutting off the water — by hand or with a motorised valve (extra)
how long it takes15 minutes
what photo to sendthe spot
0
A sensor on the front door, balcony door or a window. An alert on your phone when it opens — in its own app, separate from Netatmo. A siren and security — that’s an alarm system.
Includedsensor, setup (in its own app)
Not includeda siren and an alert when someone comes in — that’s an alarm system, priced separately
how long it takes15 minutes
what photo to sendthe door or window
0
For your phone to tell you the power has gone off, the router has to stay alive — a small UPS for the router. An alert when the power goes off and when it comes back; we test it with you at installation.
IncludedUPS for the router, connection, alert
Not includedkeeping appliances running for long periods — this isn’t a generator
how long it takesabout an hour
what photo to sendthe router and the consumer unit
What this figure means. A guide: the device at our supplier’s catalogue price incl. VAT, installation at €30 an hour, and setup. It isn’t a quote — the quote comes within 24 hours, from your photos. Outside Varna, a travel fee applies by zone.
02No rewiring
The module goes behind the switch. The switch stays.
That’s why we don’t chase walls or pull new cables. Three things need to be in place, and we can see them from your photo.
1
Wi‑Fi at homean ordinary home router is enough for a flat; for a two-storey house we check the coverage at the site visit
2
Room for the module in the back boxthe module goes in the back box behind the old switch; if there’s no neutral in the box, we fit a switch that works without one — we’ll tell you which from the photo
3
One gateway per homein a back box next to the consumer unit or on a DIN rail inside it; without it the switches only talk to each other
Honestly: your old switches can stay and work just as they do now; if you want a new look, the range is swapped for Living Now or Classia — that’s a separate line item. The app is Netatmo’s, with no subscription; you’re the admin, and we keep no access after handover.
03Packages
Three ways to start. These are the products we’ll fit.
Legrand and bticino ‘with Netatmo’ and Netatmo thermostats — from our supplier’s catalogue, at today’s prices. A package is a starting point: you build it up room by room in the list above.
Homefrom €1,217flat or house — lighting, blinds, climate, water heater
- gateway and six smart switches, one dimmer
- two sets of blinds
- Smarther 2 thermostat
- water heater on a schedule
- ‘Morning’, ‘Evening’ and ‘Leaving’ scenes
devices 924 + installation and setup 9.3 h ≈ 293 = 1,217
Holiday homefrom €679a house or flat you’re not in all year round
- gateway and heating thermostat
- water heater and one more appliance on a schedule
- leak sensor
- power-cut alert
- ‘Leaving’ scene
devices 518 + installation and setup 4.9 h ≈ 161 = 679
Product prices are from our supplier’s catalogue, incl. VAT, and update on the site automatically. Installation and setup are €30 an hour; in the packages they’re included. Photos are the manufacturer’s.
04Holiday home
Arrive on Friday to a warm house. Nothing freezes in winter.
For houses and flats on the coast that you’re not in all year round. Five things your phone does for you.
- Thursday evening1
Heating on from your phone
The thermostat goes up to 21° when you tell it to, or on a ‘before arrival’ schedule. The water heater works the same way.
thermostat · water heater on a schedule - in winter2
8° frost protection
The heating holds a minimum so the pipes don’t freeze; the app shows you the temperature at home at any time.
thermostat · alert - when the power goes off3
You know within a minute
The router sits on a small UPS so it can send the alert when the power goes off, and when it comes back. You don’t hear about it from the neighbour a week later. If you also fit an alarm system, its hub has a battery and a SIM card — then the alert comes through even without a UPS.
power cut alert - if there’s a leak4
The leak sensor
Under the water heater or washing machine. At the first sign of water — an alert; you can shut the water off remotely if there’s a motorised valve (extra).
leak sensor - when you leave5
‘Leaving’ in one press
Everything off, heating at 8° — with one press of the switch by the door. No ‘did I leave the cooker on?’ on the way.
‘Leaving’ scene · switch by the door
05What you get
Which device controls which circuit. On paper and in your profile.
A year on, nobody remembers which module is where. We leave you the list, the network diagram and the scenes written down — and you’re the admin.
- Device → circuit listevery module and switch: where it is, what it controls, which room it’s under in the app.
- Network diagramgateway, router, coverage; what’s wired and what’s wireless.
- Scenes, written downwhat ‘Going out’, ‘Evening’ and ‘Leaving’ do — so you can change them yourself.
- Passwords in an envelopethe account is yours; admin access stays with you, not with us.
- Test report and warrantymodules and scenes tested; installation warranty of 24 months, manufacturer’s warranty on the devices; contract and invoice.
- Level A passportall of the above in your profile, with a QR sticker in the consumer unit next to the gateway.
DEVICE → CIRCUITone-bedroom flat · example
| No. | device | where | controls |
|---|---|---|---|
| 01 | gateway | back box next to the board | all |
| 02 | wireless switch | living room, by the door | chandelier |
| 03 | module behind switch | bedroom | ceiling light |
| 04 | blinds module | living room, motor box | blinds |
| 05 | thermostat | hallway | boiler |
| 06 | socket module | bathroom, by the water heater | water heater |
| … the ‘Morning’, ‘Going out’ and ‘Evening’ scenes — described on the next sheet | |||
06How it goes
From a photo of your switches to the ‘Evening’ scene.
Five steps. The starter package takes half a day; we do the setup together so you know what’s where.
- day 01
Photo
The switches you want to make smart, the consumer unit with the cover off, and where the router is. From here or on Viber.
you · 3 minutes - within 24 hours2
Quote
Which switch gets a module, which gets replaced, what the blinds and thermostat need; an itemised price showing what’s included and what isn’t.
us · within 24 hours - in the diary3
Date
For a two-storey house, a site visit to check coverage (€15, deducted from the quote). Otherwise, straight to installation.
together - on the day4
Installation and setup
Starter package — half a day; ‘Home’ — a day. The modules, the gateway, and the app with rooms and scenes, set up with you.
us · with you at the end - at the end5
Handover
The device → circuit list, scenes written down, passwords in an envelope, 30 minutes of training. Payment after installation and setup.
together · 30 minutes
A smart light switch (a module behind your existing switch) — from €78 including the device and installation; blinds from €90; thermostat from €249. The starter package — gateway, three smart switches and setup — is from €413. You add room by room, whenever you like. Build your list or get a price.
No. The modules go into the back box behind your existing switch or into the consumer unit — the switch stays. No new cable and no chasing. From a photo we check two things: whether there's a neutral in the switch box (if not, we fit a switch that works without one) and whether the Wi‑Fi reaches the whole home. How it's done
At home, yes: the switches and modules talk to the gateway over your home network, and the schedules are stored on it. Without internet, the only things that stop working are control from your phone when you're away and notifications. No subscription and no monthly fee.
Yes. The module sits behind the switch, and the switch still turns the light on and off. If you want a switch somewhere new, we stick on a wireless one — no cable. You can keep the same range or change to Living Now / Classia — your choice, as a separate line in the quote.
KNX is the system for a new-build house with a design and a programmer — with a cable to every switch and a price several times higher. We install Netatmo (Legrand and bticino): into your existing wiring, no new cables, one app for switches, blinds and thermostat. We don't fit Shelly — we stick to one system that we know and support. For a new-build with a design — after a site visit.
Yes — Netatmo works with Apple Home, Google Home and Alexa. You get voice control — ‘turn off the living room’ — and scenes from your own phone, without a separate app, if you prefer.
Yes. The thermostat starts the heating on Thursday evening, so on Friday you arrive to a warm house; in winter it holds 8°C to stop things freezing. A leak sensor and a power-cut alert — so you know rather than guess. For the power-cut alert, the router runs on a small UPS. Holiday home
The switches talk to the gateway inside your home, and the app runs on your own account and password. We never leave ‘admin/admin’; you're the administrator, and we don't keep access after handover. If you like, we'll add a second family phone.
An ordinary home router is enough for a flat. For a two-storey house we check the coverage at the site visit; if a room has no signal, we add a second access point (charged separately).
24 months on the installation; devices are covered by the manufacturer's warranty (Legrand, bticino, Netatmo). Payment after installation and setup — always with a contract and an invoice.
Smart home Varna · Dobrich · Balchik · Kavarna · Shumen · Byala · Obzor — the travel fee for each zone is in the quote.
Yavor · Fazo, Varnataking on new jobs · north-east Bulgaria
A photo of your switches and consumer unit today.
A written quote within 24 hours.
The switches you want to make smart, the consumer unit with the cover off, and where the router is. From the photo we’ll tell you which can be done without cables, which need a module behind the switch, and how much it costs.